[Discussion] Router installation

[Joyce E. Clarke]

** Reply to message from "Bob"
<POSSI-4c9yah2 at listemail.net> on Thu, 7 Jan 2010 21:07:07
-080

> If you do not use DHCP you will need to use the TCP/IP settings to change the
> computer address to 192.168.0.xx.  Then you can use your browser to change its
> address.

Well, that does make sense and I did think of that;
probably better to mess this one up than the current
firewall/router machine.

Not having the TCP/IP GUI, please confirm that SETUP.CMD
will become:

> ifconfig lan0 192.168.0.3 netmask 255.255.255.0 metric 1 mtu 1500
> REM ifconfig lan1
> REM ifconfig lan2
> REM ifconfig lan3
> REM ifconfig lan4
> REM ifconfig lan5
> REM ifconfig lan6
> REM ifconfig lan7
> ifconfig lo 127.0.0.1
> REM route add default 192.168.1.1 -hopcount 1
> ipgate off

It will be nice to get this set up before my husband comes
home and wants to go on line again.

Joyce

Joyce Clarke, Wellness Business Coach
	running on eComStation 2.0rc5
                PBM 125a build 1969
             
 	http://jc-clarke.usana.com