[Discussion] LJ 2015 Support(ed)?

[Thomas Clayton]

Snow Storm here - UN-related to Governor's arraignment - and I won't get out again till Wednesday, sometime. 

I look forward to other's (on this list) reply in the meantime. 

Also, I'll do MY research "thing" on-line about it, overnight.

Thanks for the recommendation, Carl.

Tom




--- On Tue, 12/9/08, Carl Gehr <Carl.Gehr at MCGCG.Com> wrote:

> From: Carl Gehr <Carl.Gehr at MCGCG.Com>
> Subject: Re: [Discussion] LJ 2015 Support(ed)?
> To: "POSSI Discussion List" <discussion at lists.possi.org>
> Date: Tuesday, December 9, 2008, 2:59 PM
> Do not hesitate!  Get it while you can!  I have TWO of those
> printers! 
> They work quite well with eCS 2.0 RC2 and RC5 using either
> the USB or
> the network print server.
> 
> The LJ 4000 PS driver [30.822] is working just fine. 
> Supports auto
> duplex and, so far, everything I've thrown at it.  I
> sent print files
> via my TPad T60 wireless to a wireless router that is
> connected to
> another router that has the printer attached.  My
> wife's desktop
> system, attached to the second router with the printer
> attached also
> uses the printer.  My business partner has her printer
> attached via the
> USB, but when I am there, I use the network attach
> simultaneously with
> the USB active.
> 
> The printer can be configured over the LAN using a browser.
>  [I happen
> to use the latest SeaMonkey, but I can't imagine any
> problems with
> something else.]
> 
> GO FOR IT!
> 
> Carl
> 
> PS The PCL driver works OK also, it just seems to do better
> with the
> PS.  
> 
> 
> =-=-=-=-=-=-= In Reply to Your ORIGINAL MESSAGE
> =-=-=-=-=-=-=
> From: Thomas Clayton <topcatdrc at yahoo.com>
> To:   POSSI Discussion <discussion at lists.possi.org>
> cc:   
> Date: Tue, 9 Dec 2008 11:08:30 -0800 (PST)
> Subject: [Discussion] LJ 2015 Support(ed)?
> 
> Dear POSSI:
> 
> My local Staples has a HP LJ 2015DN for about $350.
> (That's about $150
> off the usual, AFAIK. It seems to be the last in the store
> and THAT
> seems to be WHY it is "clearance" priced.) It has
> Duplex (double-sided)
> capability as well as USB and etherNET connections.
> 
> Question(s) is(are):
> 
> Is there Warp 4.4 or eCS 1.2 printer (driver) support?
> 
> Will the Duplex feature be supported? (Can it be made
> workable some
> way?)
> 
> Can a connection be made to it through one, or the either,
> or both, of
> these "ports".
> 
> In terms of connectivity, I have preference for eNet over
> USB (though
> the latter is the coming - err, arrived - thing for
> peripherals). I'd
> like to think eNet will be the easier way for our OS to
> connect to it,
> but maybe not. I'm sure the eNet is a sharing solution,
> as well.
> 
> LASTLY, AFAIR, someone on this list had gotten one of these
> new(er)
> style printers. Did ANYone get one of these 2015s?
> IF SO, how's is it working out?
> 
> 
> Sincerely,
> 
> Thomas Clayton
> (Of course, by the time I make up my mind, it could be
> sold. Oh well.)
> 
> 
> 
> _______________________________________________
> Discussion mailing list
> Discussion at lists.possi.org
> http://lists.possi.org/mailman/listinfo/discussion
> 
> -- 
> This email was Anti Virus checked by Astaro Security
> Gateway.
> http://www.astaro.com
> 
> =-=-=-=-=-=-=-=-=-= END ORIGINAL MESSAGE
> =-=-=-=-=-=-=-=-=-=
> 
> 
> _______________________________________________
> Discussion mailing list
> Discussion at lists.possi.org
> http://lists.possi.org/mailman/listinfo/discussion