[Discussion] USB Device Access

[Thomas Clayton]

Don:

My experience is
with, BOTH, USB 1.1 and USB 2.0 on the same computer implies
the FRONT ports are the faster USB 2.0 ones - not the back ones.

I HTH (and is correct).

Tom Clayton

--- Don Burch <theunk at telus.net> wrote:

> Niels,
> 
> I hope this helps you. As noted, I had to tweak the IFS statement a
> bit 
> but the main issue seemed to be in the USBMSD.ADD parameters.
> The USB configuration notebook can add a lot of extra switches and 
> confusion so use with caution. It does a good job of sniffing out the
> 
> hardware controllers. While I have 7 controllers on board, 5 of them
> are 
> USB1. If the 2 USB2 outlets are the ones fixed at the back of the
> case 
> then I may just disable most of the USB1 ports.
> 
> One thing I like about the OS/2 handling of devices is when you eject
> it 
> is gone from the WPS. With windows your never really sure.
> 
> Don
> 
> Niels Jensen wrote:
> > Thank you very much. I have had some problems with USB stiks, which
> I 
> > have received free, so I will see if the config.sys is set up
> correctly.
> > 
> > Regards, Niels
> > 



 
____________________________________________________________________________________
Now that's room service!  Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.
http://farechase.yahoo.com/promo-generic-14795097